Hub front 240s Straightpull Non Disc Quick Release, 16 holes

DT SWISS hub front 240s Straightpull Non Disc for quick release 
Hubs from DT Swiss enjoy the reputation of being almost indestructible. Thanks to high-quality industrial bearings made of stainless steel and effective seals, the 240s are the source of this reputation. Just unpack, install in the bike and forget. The hubs are designed to be extremely user-friendly, so there is no need to adjust the bearing clearance and the maintenance intervals are only required at very long intervals. Should service be necessary after tens of thousands of kilometers, thanks to the DT Swiss plug-in system, the hubs can be disassembled and maintained within a few minutes without special tools. The proven flange geometry is the perfect basis for durable and stiff wheels. Using straightpull spokes reduces the load on the spokes and reduces the risk of spoke breakage to a minimum! 

NOTE: The Non Disc quick release front hub version is not convertible for use with quick release axles. 

Technical specifications: 

• bearing : 2-fold over stainless steel ball bearings 
• Material: aluminum 
• axle type : 5x100 mm quick release 
• Number of holes: 20 
• Infeed pattern: only radial 
• Spoke tension: 1000N 
• Color: Black
• Weight: about 109g 

 Flange geometry: 

• Spoke hole diameter: 2.5mm 
• Spoke hole circle diameter left: 30 mm 
• Spoke hole circle diameter right: 30 mm 
• Flange distance: 75.8 mm 
• Flange distance left: 37.9 mm 
• Flange distance right: 37.9 mm